7 Reasons Your Thyroid Medication Isn’t Working
I'm going to take EACH Reason and add my own commentary to them. My own daughter is going through this, and plus I've done these. So this is what I know, thus far...
Keep in mind that we are ALL different. So what works for me, may work different for someone else, so be sure to check with YOUR OWN ALTERNATIVE provider, at what may be needed for your own body.
1. You have undiagnosed Hashimoto's disease.
You must remove the man made trash forced into us via
vaccines (like mercury and aluminum), GMOs, chemtrails, Halogens like fluoride, chlorine, bromine (See
Iodine And The Halogen Revolution). However, avoid all of Vickery's products now, because they allowed the formula to be changed and added excipients and Cellulose to the mix.
Organic Sulfur, sourced from Patrick McGean's
Cellular Matrix Study will move out the trash. Doctor Brice E. Vickery's Platinum Plus Amino Acids used to move out the trash, as they, too, contain sulfur, and also contain
L-Tyrosine, which is needed to make T4.
But Vickery allowed his formula to become corrupted with excipients and
cellulose/microcrystalline cellulose which is also TRASH (Ahem!). So I can no longer recommend those.
Master Amino Acid Pattern (MAP) is still a good clean formula, except they don't contain the sulfur. So we can get the
NAC separately to make up for that one. And also L-Tyrosine from PureBulk company. MAP is also great for vegans.
It's also on Amazon, if preferred.
Where is the sulfur? Search when thyroid issue began being medicated. The sulfur was removed with the use of synthetic chemical fertilizers in 1954 in the US. None of our study members are off of thyroid support but they are symptom free, especially of the side effects to the synthetics.
Got sulfur? ~Patrick McGean
Taking iodine containing Sea Minerals are helpful.
EPX Sea Veggies Daily. Be sure to change out the "veggie capsules" to BSE-Free Bovine gelatin capsules, due to nano-tech polymerized
cellulose/hypromellose caps, which are far from ever being a veggie. The mix appears to be fine.
The Atomic Iodine (recommended by Edgar Cayce)
aka Nascent Iodine. See
Thyrodine Here and Nascent Iodine
I prefer Lugol's personally. I get 5% Lugols with Selenium from
3rdi Store.
The reason their synthetic thyroid don’t work: it has no iodine.
https://messiahmews.blogspot.com/2019/01/iodine-forbidden-nutrient.html
Organic and clean food, such as Kale, Kelp, Dulse, Dandelion, etc... Have dandelions in your yard? Pick them, clean them and EAT THEM!
2. You have lowered thyroid receptor sensitivity.
The Hypothalamus, Pituitary, Thyroid Axis.
3. You have poor thyroid hormone conversion.
Inability to convert T4 to T3. Essential Amino Acids, especially
L-Tyrosine, which is in the Platinum Plus Amino Acids by Doctor Brice E. Vickery. Well Lo and behold! They also contain SULFUR! And they
used to rebuild the spine! They were great for back pain and Fibromyalgia.
*However, Vickery allowed his supplement to be formulated by outside companies and they have corrupted his products with fillers and
cellulose! I can no longer recommend his products due to that. Sorry. So we can get the same amino acids from PureBulk and/or Bulk Supplements and build the same formula.
Biotics Research Meda-Stim used to help with the conversion, but it, too, has become contaminated with
cellulose. Taking selenium is also helpful in conversion.
We get it now in the
3rdi iodine from Jimmy Pitticus at
https://ebay.to/2GCJGUB
The original Meda-Stim supplement blend originally had a great smell. But we avoid
cellulose, so no longer support that company. However, when I used to open the bottle, it was like aromatherapy. Some herbs actually smell pretty good.
Taking a full spectrum of minerals would be most helpful, since most diseases are a result of a mineral deficiency.
Tangy Tangerine by Youngevity is sufficient. I also like
IntraMax and
IntraMIN by Drucker Labs.
While the
IntraMax contains the B-12 Methylcobalamin, they also added some cynanocobalamin to the mix. Just thought I would put this warning on there, so you all can decide whether you want to buy or not. Adding a separate Methylcobalamin B-12 would be a great idea, if deciding to buy the Max version.
B-12 from Bio-Alternatives is a good one. At least it would offset it. Personally, we would prefer to just get the
IntraMIN and go with the
Youngevity Tangy Tangerine.
IntraMIN has not been changed.
Another overlooked important this is the LIVER. Yes! The Liver must be in tip top shape, as the conversion of T4 to T3 happens there. A liver/gallbladder flush is a must. It's gross, but must be done. Do a colon cleanse first, and then do the flush. Plus liver support.
Detox tea by EPX is a good one to begin with. The
organic sulfur helps with regeneration of the liver, as well as moving out the trash of man. Good digestion period is also a must. Digestive enzymes such as
Cellfood are good. Systemic Enzymes such as
Fibrenza, (or from
Vaccination Liberation here) and perhaps along with a
stand alone Serrapeptase, are also liver cleansing. They also clean the excess fibrin in the blood. Keep in mind that synthetic Synthroid prescription of choice can not convert to T3, because it is a synthetic T4. That's where people mess up and get discouraged. Plus the systemic protealytic enzymes also dissolve ADHESIONS and SCAR TISSUE.
See
Wilson's Thyroid Syndrome and
Royal Rife site of Thyroid Conditions, which mentions many of the same supplements. However, they still recommend BioticsResearch/Standard Process, and they have long since become contaminated with
cellulose. Everyone will have to search out alternatives.
We must be clean in order to function at an optimal level. The following cleanses should be done for best results...
* Removal of heavy metals and chemicals. Via the organic sulfur and
LL's Magnetic Clay Baths and/or
zeolite clay. Easy on the zeolite liquid stuff. It's only a short term solution. The Clay Baths are long term, and better.
* Parasite cleanse ala Hulda Clark
* Candida Cleanse
* Colon Cleanse:
3 Day Cleanse or
Blessed Herbs Colon Cleanse.
* Kidney Cleanse.
* Liver/Gallbladder flush. Can still do the flush even without a gallbladder, since the stones are made in the liver. The gallbladder is simply a storage for the bile, which are clumped calcified and/or cholesterol stones.
See
Sensible Health's website that explains how all of this works, regarding liver function and cleansing, herbs, etc... They have some wonderful herbal extracts for Liver Qi Congestion.
Just found out about the
RemedyLink's line of suppositories to detox
liver/kidneys,
heavy metals,
lymphatics, and more!
Hormone imbalances from all the environmental and man made trash. Environmental estrogens are hormone wreckers. (throw out all the plastic and other dioxin-containing products). Even mainstream toilet paper is full of dioxins.
7th Generation has dioxin-free paper and hygiene products. Dump lamestream dairy, which the cows are injected with genetically engineered bovine growth hormone. Like that ice cream, do ya? Switch to a coconut ice cream.
Coconut Bliss has some great tasting ice cream, if you must have it. Go easy, because any sugar can also mess up hormones.
And then you have birth control pills, which also mess up the delicate hormonal balance. AVOID Soy! It's also GMO.
4. You have high reverse T3 levels.
That comes from stress. Probably also have high cortisol levels as well.
Cortisol-Ease by Elijah Free helps to ease that, plus perhaps taking some
DHEA by BulkSupplements or
PureBulk. Also, check the Wilson Thyroid Syndrome site. They use their own supplemental medications and also a time release T3 made up by a compounding pharmacy. I did the compounded T3, until the alternative doc that prescribed it for me, died a few years ago. He would send it from out of state. RIP Roy.
5. You have stressed brain-thyroid communication.
Again the Hypothalamus, Pituitary, Thyroid Axis.
The original Wilson's Syndrome provider put me on Drenamin by Standard Process. My adrenals were also needing help in rebuilding, so that, in addition to to the DHEA by Biotics Research, which he didn't suggest the DHEA, but, I did that on my own. I used off and on the Mannatech's Plus supplement, which nourishes the adrenals to produce it's own hormones. The
Cortisol-Ease mentioned in above paragraphs addresses the excess cortisol that results from stress. I was also put on Standard Process Simplex F (female formula) and the Biotics Reseach Cytozyme-PT/HPT. I can no longer support or use Mannatech, BioticsResearch and Standard Process, because both companies added
cellulose to their products. So I can no longer recommend them period. Bur originally when I was first put on them, they all were fine at the time.
Vitamin B-12 (METHYLCOBALAMIN) and other B vitamins are important for energy and nerve rebuilding. Notice when your nerves are shot, and when you take B-12, you feel better? Well then....
Many believe that chronic fatigue, fibromyalgia, and hypothyroid are the same, because the symptoms are THE SAME! Hmmmm...
Always overlooked is the structure. Anyone with a thyroid condition of any kind always have the C7 and T1 out of alignment, and those two are usually stuck forward with the Facet joints STUCK OPEN. The capsular ligaments could be stretched and lax too. Meningeal adhesions and compression, etc...
See Dowagers Hump Fix by Eric Dalton.
http://erikdalton.com/a-fly-by-on-the-dreaded-dowagers-hump/
The
Advanced Biostructural Correction (ABC) corrects the STUCK FORWARD vertebrae as those are the
PBPs (Primary Bio-mechanical Pathologies)
Also, diabetics (type 2) have their T7 vertebrae misaligned as well. Which is usually STUCK FORWARD.
I would presume all the other nutrients we're lacking is due to nerves supply being blocked or cut off so it doesn't reach that particular organ. We need to do whatever we can to help our body to heal. Rather than solely relying on meds. ~Lili Leong
Others are doing the
Starecta protocol. I have not done it yet, due to my situation with my teeth, but I have friends who are doing it and succeeding in straightening themselves up.
ABC is doable for me, so that's what I've been doing. Getting rid of meningeal adhesions and
meningeal compression is important for those who are suffering fatigue. So it's structural and hormonal.
I'm trying starecta to help my brother's thyroid. The structural aspect that dietician & drs often ignore. I'm also thinking meningeal release to the neck might help restore communication of nervous system ~Lili Leong
I used TransD Tropin for while, but it got expensive. Also, a couple of years ago, the damn FDA (Fucking Death Administration) banned it. See my other blog on here.
http://transdtropinhgh.blogspot.com/
6. You have a selenium deficiency.
A MUST HAVE for the conversion of T4 to T3. Eating alot of raw onions to get it from food, and supplement with
BioTic Research Selenium liquid supplement. Also
Youngevity, has a selenium supplement too. BioticsResearch selenium has preservatives but no cellulose. But, I now prefer
3rdi Iodine, the 5% with selenium.
7. Your medication contains gluten.
GET OFF THE DAMN GRAINS! That's Wheat which is GMO and a Eugenics project. It's not the Biblical wheat, or what our ancestors ate.
Okay, about wheat and these other damn "whole grains"... When a piece of whole grain bread spikes someone's blood glucose to 170, there's something seriously wrong. Hell, even a freaking snickers bar barely puts some people over 150 at 1-hour and 2-hour postprandial. You won't see blood glucose go above 130 on paleo/primal/raw organic foods. I'm not diabetic, thank God, but I totally understand all the research given and it's very clear that microvascular damage begins to occur at blood glucose levels >140. Not to mention the un-felt downstream effects of glycation (which, by the way increases as the blood glucose level increases). We're talking oxidized LDL particles, downregulated nitric oxide activity, increased vascular permeability, and increased prothrombotic properties of the vessel walls. That, folks, is a recipe for heart disease. So, those of you that want to defend wheat and these other GMO whole grains, go right ahead, but there is NO Science to secure any arguments. And don't even get me started on high fructose corn syrup (GMO) and mainstream dairy that is full of
genetically engineered (GMO) bovine growth hormones.
Cardio4Life will help with the microcirculation as the l-arginine helps with vasodilation, and the nitric oxide regulation. It also contains
Methylcobalamin B-12.
We also sat through a 2-hour presentation by Dr. Joel Wallach of
Youngevity, as he explained alot of this.
Get off all grains, wheat, oats, rye and barley. See
Wheat Belly Blog.
All these damn grains, which also causes the blood sugar to rise, more than sugar itself, and also causes SYSTEMIC INFLAMMATION.
You can make and/or buy Paleo bread, which is from coconut flour and/or almond flour.
Giving up grains was the best thing we've ever done for our health. My husband dropped weight, when we stopped buying anything with grains in it. Same with Dairy. I've always hated white puke (aka milk).
But we can still have our cake and eat it too, with the alternative flours (rice, almond, and coconut) and dairy alternatives. The severe stomach pains came to a screeching halt after dumping the mainstream shit. Now, we can also tolerate raw goat cheese. But it's not a staple that we have often.
I have to have my raw organic veggie mix and/or salad every day, with always a liberal serving or raw onions (hello selenium!).
Now it's up to her to follow this and try these things out, as have worked for me.
Note: I haven't done them all at one time, but at various times, the different things, as things change, doctors die, monies decrease, etc... But we do what we can, and that's all anyone can do.
Addendum:
I didn't even get into all the energy aspects of this. Such as the electrical system (acupuncture/accupressure) meridian system, Chinese acupuncture, and the chakra system. The electrical system ala
synergistic kinesiology (relfe.net), which include the Gait, hyoids, and
Cloacals. See
Stephanie Relfe's site on Kinesiology.
And also the etheric body can have its own energetic blockages like etheric sludge and clinkers on spinal cord and various organs. See:
The Etheric Torch by Cbswork on Whale.to for more info on that.
Original Made by Ben Morton...
I'll gladly give the recipe for the original design :) This is simple but please make it correctly. I can not endorse any design other than the design CBs Told me to maintain. So here it is:
a clockwise copper-coiled wrapped single terminated (preferably of Arkansas origin) quartz crystal approximately 3/4 of an inch in length.. this wrap comes up the crystal to the point and fans out about a half an inch into a clockwise funnel.. with wide end facing the eventual nozle of the ELW.
pour an inch of resin into the base of mold.
add approximately 3/4 teaspoon ov brass metal shavings to resin.
add the wrapped quartz crystal and stand it upright deep in the mixture of metal so that it is not falling over. add enough resin to just cover the crystal. let harden. add an sbb coil (direction of placement is of no concern in this) let the coil rest flat and add enough resin to cover the sbb coil. let harden. wrap 20 gdge copper wire 3-5 clockwise turns around a magic marker ink pen or other similarly sized cylinder, then use needlenose pliers to Finely shape the top of the coil 1/3 the way in toward the middle of the coil. reposition the needlenose pliers and pull the wire end down into the center of the magic marker sized coil- to the bottom or very near the bottom of the inside center of the coil. then make a 1/8th to 1/4 inch U bend and direct the coil wire straight up 2 & 1/2 inches.. pause,
Now, before later ;) add your minerals onto the wire, in this order:
peridot, topaz (i used blue), and amethyst) these rest in or on the U in the center of the magic marker size coil... ok, back to the ELW coil...
we now have approximately 2 and a half inches of straight copper extending above our larger clockwise coiled base that extends up to where the inverted double C loop is (top of the ELW coil unit)
continue the straight copper length about an inch and a half; remembering to keep this straight and lined up with the lower straight segment below the double C loop. this upper length of the wire will end up somewhat centered in the brass tube (of approx. 3/4 inch to 1 inch length) that ends up on top of the ELW. Residing Inside that brass tube, lives an emerald green emerald. Don't forget it or you don't have an ELW- you'll only have a torch. Suggested reading is about the healing properties of emerald. just informational, in this regard. onward and upward in this design, we now have our ELW coil finished, sitting nicely pointing up on the table without assistance (it doesn't fall over) you can fit 30 together in the middle of the table without them falling over. its a pretty sight :) please make them correctly :D
next we cutout a nickel sized piece of brass thin enough to bend with fingers but still stiff. brass, not copper. now cut that in half and trim only 1 of those half rounds about an 1/8th inch smaller than the other half. trim from the flat side of the half circle so when you place theme back together in the ELW you wind up with a kinda off-center slit between the two pieces of brass (where the ELW coil will come up between and preferably touching only 1 of those half circle flat pieces of brass.
Next in the pouring, set the finished ELW coil into the mold so it rests pretty much centered on the sbb coil (now slightly covered by hardened resin) just above the crystal that is now also hardened in metal/resin)
..remember to keep the ELW coil looking pretty as it was when finished on the table top. can you tell i've seen enough not so pretty ELW coils floating around the web? :) You still have the best that I've seen hun :)
ok, now we have an ELW set and ready to pour the middle 1/2.
pre-heated (with a blowdrier) resin works nicely as it conditions the resin to be quite viscous and won't disrupt your fine setting of the ELW coil too much during pouring. pour the resin to about 1/8 - 1/4 inch above the double C loop toward the top of the ELW coil. let harden.
you should now have approximately 3 inches of poured and hardened resin in the nearly completed ELW before finishing these last 3-4 pours. yes :) it takes that many pours in these finishing steps to get it to turnout correctly.
on top of the hardened resin that you now have in the mold, pour just enough resin to set the flat pieces of brass into and still have just enough resin in the layer to cover the flat brass half rounds (that you've centered in correct proximity to the ELW coil top). let harden and it is crucial to have it harden level, as level as possible.
it works best to interupt the hardening process just before the resin sets permanently (in this layer) and place the brass tube (nozzle) centered in the mold and preferably, with the ELW coil wire centered in the brass tube.
interrupt the hardening process correctly and it saves you 1 pour in the final stages of production because you won't need to pour 3 drops of resin into the brass tube to seal it ( if the bottom of the brass tube isn't sealed before filling the tube with resin, it will run out the bottom of the brass tube and fill up around the outside of the brass tube.) thus leaving you with a cylindrical encapsulated ELW. ouch, not after all your hard work. seal the inside of the brass tube with enough resin :)
after your brass tube has been babysat and is now somewhat solid and sealed, add your emerald bit into the brass pipe so it rests alongside the upper extension of the ELW coil wire.
try to have the ELW coil wire end extend at least 3/4 the way through the brass tube length. its ok if the coil comes to just below the brass tube end.
Now, with emerald in place, inside of brass tube sealed, and the flat brass half circles already covered in hardened resin; now is the second to last pour. :)
pour the center of the brass tube full of resin, a dome of liquid resin resting in the top of the ELW nozzle will be a lot nicer on the skin than a sharp edge, so use a stir stick to put every last drop of resin in the tube as it will hold. then go ahead and pour the last 3/8ths inch of resin to the outside of the nozzle. that's the last pour unless something happens and you aren't satisfied with the nozzle. if it doesn't come out correctly, no problem just add the ELW to the inside base of your CB pipe because it will burn the heck out of the sludge your CB is clearing from your environment. and start over on the ELW :)
Its a simple design but do it correctly. I've seen so many designs and people dropping my name on their designs. You've stuck to the design best, so I'm here with correct instructions. I've been ignored by the other guys who make another design, put my and CB's name on it and market them as the Improved ELW.
Much respect hun :) Thank you for your great work on so many fronts.
If you wish to fight back on another level just add a phenacite above the emerald. simple enough :)
or I'll be happy to keep you in fine supply of ELWs. either way
the perfect mold is a plastic double ended round toothbrush travel case with 1 single drop of peanut oil dropped into the first layer of resin (the metal layer).
Ben Morton
drummerboy_24
daynightwalker6@gmail.com
daynightwalker6@yahoo.com
